top of page

270 VTOL

Long range multipurpose platform with vertical take-off and landing capabilities and large payload capacity.

4 hours of flight time.

Is easy to transport and can be assembled in 2-3 minutes. 

Video link to max 15 km range.

The video and target location information streamed to the pilot are georeferenced.

Ultra narrow angle thermal camera provides the same quality of video from 200m altitude as DJI or Autel at 60-80m.

Parallel 433 MHz telemetry to 35 km range.



Material: FRP & Carbon Fiber
Wingspan: 2.7 m (8.9 ft).
Length: 1.6 m (5.3 ft).
Packing box dimensions: 0.98 x 0.52 x 0.53 m (38.6 x 20.5 x 20.9 in).

UAV structure weight: 3.3 kg (7.3 lbs).
Load weight: 1-3 kg (2.2-6.6 lbs).
Total weight: 15 kg (33.1 lbs).

Payload: (multi) camera, 1 kg (2.2 lbs) sensor, etc
Payload cabin dimensions: (L x W x H): 250 x 160 x 130 mm (9.8 x 6.3 x 5.1 in).
Payload cabin MAX width: 200 mm (7.9 in).
Payload cabin MAX height: 160 mm (6.3 in).

Cruise speed: 23 m/s (51.5 mph).
Wind resistance: 10 m/s (22.4 mph).
Flight time: 4 h
Operational range: 

  • with 2.4Ghz point to point radio: 30 km (11.6 mi).

  • Unlimited over GSM radio in mobile networks covering area.

  • Flight time is limited to battery capacity (4 h with 1300 Wh battery).



KrattWorks KW270 VTOL is drone platform designed for long distance operations with various payloads.

It is designed to be easily transportable in a compact box. It can be assembled quickly without tools or fasteners in just 2-3 minutes by one person.

Transport box about 1 x 0.5 x 0.5 m (39 x 21 x 21 in) fits conveniently into the trunk of a SUV or back seat of a family car.

KW270 VTOL has a super large payload compartmenent of 250 x 160 x 130 mm (9.8 x 6.3 x 5.1 in) to allow the user to mount various custom paylods and sensors. Floor of the paylaod compartment is flat which is convinient for payload arrangement and installing. The maximum width of the payload cabin is 200 mm (7.9 in) and the maximum height is 160 mm (6.3 in) (can not be achieved simultaneously).

The bottom of the drone body is flat: it can be flown with or without landing gear and the landing gear position can be adjusted according to the payload position.

The drone is using well known and widespread components which can be easily replaced, thus keeping maintenance costs low.


Contact us



©2023 by KrattWorks,

Phone: +372 5456 0001

KrattWorks Ltd

Tähnase tee 2, Peetri

75312 Rae, Harjumaa, Estonia

  • KrattWorks Facebook
  • KrattWorks LinkedIn
bottom of page